#!/bin/rc
TIMESYNCARGS=(-n -a1000000)	# accuracy in nanosec

mntgen -s slashn && chmod 666 /srv/slashn

# parallelism for mk
NPROC = `{wc -l </dev/sysstat}

# bind all likely devices (#S was bound in boot)
for(i in f t m v L P U '$' Σ)
	/bin/bind -a '#'^$i /dev >/dev/null >[2=1]

# set up any partitions
#diskparts

# start up local swapping
disk=`{ls /dev/sd*/swap >[2]/dev/null}
if (! ~ $#disk 0)
	swap $disk(1) >/dev/null >[2=1]
rm /env/disk

# we do this before we have a name.  we may need to do network
# setup so that we can get a name.
if(test -e /rc/bin/termrc.local)
	. /rc/bin/termrc.local

# cs sets sysname (termrc.local may already have started it so check)
if(! test -e /srv/cs)
	ndb/cs
sysname=`{cat /dev/sysname}
if (~ $#sysname 0 || ~ $sysname '') {
	sysname = gnot			# default
	echo -n $sysname >/dev/sysname
}

# machine-specific startup (e.g., for devices not probed)
. loadcfgpxe
if(test -e /cfg/$sysname/termrc)
	. /cfg/$sysname/termrc

# start dns if we have an internet
if(test -e /net/ipifc/0/ctl && ! test -e /srv/dns && ! test -e /env/dns)
	ndb/dns -rF

# start timesync if it isn't running and we weren't told not to
if(! ps|grep -s timesync)
	if(! ~ $TIMESYNCARGS '')
		aux/timesync $TIMESYNCARGS

# add the loop-back device
if(grep -s loopback /dev/drivers) {
	ip/ipconfig loopback /dev/null 127.1
	ip/ipconfig loopback /dev/null ::1 /128
}

# set things up for vmware
# can't really, our code is old and vmware has changed
#if(! ~ `{cat /dev/user} none)
#	if(test -e /bin/aux/vmware)
#		aux/vmware

if (~ $terminal 'ARM '*pi*)
	mouseport=ps2
if not {
if(~ $#mouseport 0){
	echo -n 'mouseport is (ps2, ps2intellimouse, 0, 1, 2)[ps2]: '
	mouseport=`{read}
	if(~ $#mouseport 0)
		mouseport=ps2
}
if(~ $#vgasize 0){
	echo -n 'vgasize [800x600x32]: '
	vgasize=`{read}
	if(~ $#vgasize 0)
		vgasize=800x600x32
}
if(~ $#monitor 0){
	echo -n 'monitor is [xga]: '
	monitor=`{read}
	if(~ $#monitor 0)
		monitor=xga
}
}
if(test -f /dev/mousectl){
	switch($mouseport){
	case ps2 ps2intellimouse 0 1 2
		aux/mouse $mouseport
		# parse vgasize into fields
		vgasize=`{echo $vgasize}
		if(! ~ $"monitor '' && ! ~ `{cat /dev/user} none rsc)
			aux/vga -l $vgasize
		if(~ $accupoint 1)
			pipefile -dr /bin/aux/accupoint /dev/mouse
	}
}

usbstart
if (test -f /dev/apm)
	aux/apm

dontkill '^(ipconfig|factotum|mntgen|fossil|cs|dns|listen|reboot)$'